Environmentally Safe Automatic Parts Washers in a Size & Model to Meet Your Needs

Model 625 (click to enlarge) Model 525 (click to enlarge)

  • Clean parts in minutes with hot water and biodegradable detergents.
  • Simply put your parts in the washer, close the door, set the timer, and work on something else. Come back to clean parts in minutes, it's that simple.






    Model525625678725/S825925A925B925C
    Overall Height51"65 1/2"65 1/2"78"84"102"108"108"
    Overall Width40"51"51"60"72"76"80"88"
    Overall Depth34"38 1/4"46"41"/61"52"66"70"78"
    Turntable Diameter24"26"26"26"36"36"40"48"
    Working Height18"32"32"40"42"54"60"60"
    Turntable Load Limit300 lbs500 lbs500 lbs800 lbs1000 lbs1000 lbs2000 lbs2000 lbs
    Solution Capacity25 gals50 gals70 gals70/135 gals120 gals225 gals240 gals330 gals
    Wash Nozzle Size/Qty3/16" - 83/16" - 93/16" - 93/16" - 123/16" - 153/16" - 263/16" - 283/16" -30
    Pump Motor2 HP3 HP3 HP5 HP7 1/2 HP15 HP15 HP15 HP
    Turntable MotorN/A1/15 HP1/15 HP1/15 HP1/15 HP1/2 HP1/2 HP1/2 HP
    Pump Capacity36 GPM50 GPM50 GPM90 GPM100 GPM190 GPM200 GPM230 GPM
    @40 PSI@45 PSI@45 PSI@60 PSI@60 PSI@60 PSI@ 60 PSI@60 PSI
    Electric Wash Heater4.5 KW6 KW6 KW12 KW12 KW18 KW18 KW18 KW
    Voltage/Phase230V/1/3 PH230V/1/3 PH230V/1/3 PH230V/1/3 PH230V/1/3 PH230V/3 PH230V/3 PH230V/3 PH
    Approximate Weight530 LBS1000 LBS1500 LBS1500 LBS1800 LBS3500 LBS4500 LBS5000 LBS
    Vent Size/Drain SizeN/A / 1" NPT6' / 1 1/2" NPT6' / 1 1/2" NPT6' / 1 1/2" NPT6'/ 1 1/2" NPT10'/2" NPT10'/2" NPT10'2" NPT

    Model 725 (click to enlarge) Model 678 (click to enlarge)

  • Safety - Hot water and biodegradable detergents are far safer to work with and environmentally safer to dispose of. No more solvents!
  • Compact - Portable Design - (Model 525) Approximately the size of a solvent tank and rolls on casters. Fully self contained.
  • Fully Automatic - Timed cycle allows user to perform other tasks while parts are washed.
  • Cleaner Parts - Dirt, oil and grease, naturally separate from water and the wash solution remains cleaner and does not redeposit on the parts.
  • Turntable Rotation - The turntable turns the parts to ensure a complete exposure to wash solution, therefore a cleaner part.
  • Hand Brush - A separate, pump fed, hand brush is provided for larger parts and special detailing (Model 525)

    Standard Features

    Model 925 (click to enlarge)

  • H.D. turntable motor on front loads
  • Labyrinth door seal
  • Swing out turntable on door for easy loading on front loads and easy lift lid on top loads
  • Large nozzle orifices to avoid clogging
  • Large easy to clean chip screen
  • H.D. construction throughout
  • Incoloy heating elements
  • Simple, easy to use, maintain, and service
  • Insulated cabinets on the 678 and larger for increased efficency
  • Custom designed machines available to fit virtually any situation. Consult your Dealer for details.

    Accessories

    7 Day Heat Timer | 7 Day Skimmer Timer | Oil Skimmer | Rinse w/Diverter | Casters | Parts Baskets | Head Rack | Transmission Rack | Auto Fill | Low Water Shut-Off | Thermometer | Stainless Nozzles | Dual Turntable | Isulation | 230 1ph Power | Special Voltage | Optional Pump | Bag House Filter | Gas Heat | Oil Heat | Steam Heat | Evaporation Cycle (Elec. Only)

    Note: Some of these accessories come as standard features with some models and not all are available for each machine. Please consult your Distributor for details.


  • Calculate Pay Back Period

    Here is a simple formula for determining the pay back periord using an automated Mirage Jet Wash to clean parts vs. hand washing using a solvent tank. (Fill in the blanks below)

    A) Manual Cleaning with a solvent tank -
    Number of men: x total hrs/day cleaning manually: x the labour cost: $ x 20 (average working days/month) = (A) $?.??

    B) Productivity gained using a parts washer -
    Number of men: x total hrs/day: x flat/labour rate: $ x 20 (average) working days/month = (B) $?.??

    C) Average cost of all solvent tanks/month (rental Amount or Solvent Cost) = (C) $

    D) The cost of the Mirage Parts Washer of your choice: $

    Payback Period: (D) divided by (A) + (B) + (C) = ?.? months

    Questions or Comments? info@excaliburindustrial.com